Technical Specifications of NSN
Body Material:
Steel, corrosion resisting
Body Style:
Standard round b
Shoulder Diameter:
Between 1.3115 inches and 1.3120 inches
Pilot Diameter:
Between 0.8745 inches and 0.8750 inches
Overall Length:
2.3320 inches
Flange Diameter:
Between 1.4320 inches and 1.4370 inches
Flange Thickness:
Between 0.0880 inches and 0.0980 inches
Undercut Width:
Between 0.0730 inches and 0.0830 inches
Shaft Diameter:
0.1867 inches single shaft and 0.1872 inches single shaft
Shaft Length:
0.4900 inches single shaft and 0.5100 inches single shaft
Maximum Tempurature Rise:
20.0 degrees celsius
Rotor Input Voltage Rating In Volts:
115.0
Frequency In Hertz:
400.0
Rotor Input Current Rating:
85.0 milliamperes
Rotor Input Electrical Power Rating:
1.2 watts
Zro Impedance Magnitude In Ohms:
Between 1402.00 and 1643.00
Zro Impedance Angle In Deg:
Between 81.40 and 84.60
Zss Impedance Magnitude In Ohms:
Between 123.00 and 138.00
Zss Impedance Angle In Deg:
Between 26.50 and 31.50
Phase Shift Angle In Deg:
4.000 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt:
32.00 output
Maximum Total Null Voltage Output In Millivolts Per Volt:
60.00
Electrical Error Angular Range In Minutes:
-6.0/+6.0
Actuator Friction Torque At Plus 25 Deg Celsius:
0.05 inch-ounces
Alignment Hole Quantity:
4
Shaft Radial Play Test Point:
0.125 inches
Shaft Maximum Radial Play:
0.0006 inches
Shaft End Play:
0.0010 inches
Pilot Length:
Between 0.0350 inches and 0.0450 inches
Shoulder Length:
Between 0.1270 inches and 0.1370 inches
Mounting Surface To Terminal End Distance:
1.7770 inches
Shaft Maximum Runout:
0.0008 inches
Shaft Slot Depth:
0.0250 inches single shaft
Shaft Slot Width:
0.0200 inches single shaft
Shaft Type:
Round, slotted single shaft
Alignment Hole Depth:
0.1250 inches
Transformation Ratio:
0.783 rotor to stator
Alignment Hole Bolt Circle Diameter:
Between 1.0970 inches and 1.1030 inches
Shaft Radial Play Determining Weight:
8.0 ounces
Shaft End Play Determining Weight:
16.0 ounces
Test Data Document:
81349-mil-s-20708 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
Terminal Type And Quantity:
6 screw
Specification Data:
81349-mil-s-20708/14 government specification
Item Name:
Synchro Master Crane
Other Related Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
Part Number:
M20708/14-02D
Part Number:
M20708/14-02D
