Detail Specifications
Body Material:
Steel, corrosion resisting
Body Style:
Standard round c
Shoulder Diameter:
Between 0.9995 inches and 1.0000 inches
Pilot Diameter:
Between 0.6245 inches and 0.6250 inches
Overall Length:
2.1150 inches
Flange Diameter:
Between 1.0610 inches and 1.0620 inches
Flange Thickness:
Between 0.0880 inches and 0.0980 inches
Undercut Diameter:
Between 0.9700 inches and 0.9800 inches
Undercut Width:
Between 0.0450 inches and 0.0550 inches
Shaft Diameter:
0.1195 inches single shaft and 0.1200 inches single shaft
Shaft Length:
0.4850 inches single shaft and 0.5150 inches single shaft
Rotor Input Voltage Rating In Volts:
115.0
Frequency In Hertz:
400.0
Rotor Input Current Rating:
54.0 milliamperes
Rotor Input Electrical Power Rating:
900.0 allqjaa3.500 microwatts
Zro Resistance In Ohms:
392.00
Zso Resistance In Ohms:
11.30
Zrs Resistance In Ohms:
556.00
Rotor Dc Resistance In Ohms:
230.00
Stator Dc Resistance In Ohms:
9.70
Phase Shift Angle In Deg:
5.300 input to output
Maximum Fundamental Null Voltage In Millivolts Per Volt:
30.00 output
Electrical Error Angular Range In Minutes:
-7.0/+7.0
Actuator Friction Torque At Plus 25 Deg Celsius:
4.0 centimeter-grams
Torque Gradient Per Angular Deg:
4400.0 millimeter-milligrams
Shaft Radial Play Test Point:
0.125 inches
Shaft Maximum Radial Play:
0.0005 inches
Shaft End Play:
Between 0.0003 inches and 0.0008 inches
Pilot Length:
0.0590 mils and 0.0650 centimeters
Shoulder Length:
0.0590 mils and 0.0650 centimeters
Mounting Surface To Terminal End Distance:
1.6000 inches
Shaft Maximum Runout:
0.0010 inches
Plus J Zro Reactance In Ohms:
2430.00
Shaft Slot Depth:
0.0220 inches single shaft and 0.0320 inches single shaft
Plus J Zso Reactance In Ohms:
50.30
Shaft Slot Width:
0.0220 inches single shaft and 0.0320 inches single shaft
Plus J Zrs Reactance In Ohms:
210.00
Shaft Type:
Round, slotted single shaft
Transformation Ratio:
0.158 stator to rotor
Shaft Radial Play Determining Weight:
4.0 ounces
Shaft End Play Determining Weight:
8.0 ounces
Test Data Document:
55973-5160113 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Terminal Type And Quantity:
5 wire lead
Item Name:
Generator,self-synchronous
Manufacturer Part Numbers
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
