Used to control gas flow; 2.375 in. O/a lg; 2.750 in. W; 3.250 in. H; metal frame, shaft and springs; nylon gears; 120 vac, 50/60 hz motor w/two 22/20 stranded wire leads 7 in. Lg; 120 vac, 50/60 hz solenoid, two 0.187 in. Quick diconnect terminals; 125-250 vac, 20 amp spdt switch w/three 0.250 in. Quick disconnect terminals; timing cycle 2.4 sec min.- 60 sec max.; ambient temp range 20/160 degrees f; panel mtd w/3 6-32 thd holes set 120 degrees apart, centered in a 0.687 in.Radius, 1 hole at 6 oclock position centered on shaft; momentary operation of switch s1 causes clutch to operate, transfering s2 to n.C.Position and energizing timing motor and load; switch s2 holds the clutch operated until the time cycle is completed and the timing motor transfers s2 to n.O.Position, releasing the clutch and deenergizing the timing motor and load; fragility factor-moderately delicate
NSN 6110-00-185-8147
NSN 2925-00-328-2018
NSN 5930-01-470-0890
NSN 5905-01-116-8336
NSN 6135-01-202-8113
NSN 6685-01-408-6372
NSN 6645-00-519-1026
NSN 5930-00-164-0825
NSN 6220-01-592-4892
NSN 5895-01-406-9256
NSN 6135-01-604-3956
NSN 6145-00-003-4184
Last Updated: 07/27/2025