A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Copper washers including spring washers not threaded
NSN 5960-01-518-4440
NSN 5910-01-224-7024
NSN 5999-01-476-7325
NSN 5835-01-351-8429
NSN 5910-01-250-6592
NSN 6685-01-568-8812
NSN 5975-00-740-2708
NSN 6685-01-647-1586
NSN 7035-00-054-3414
NSN 5960-00-821-8739
NSN 5960-00-679-8153
NSN 6685-01-021-1444