A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5895-01-076-5871
NSN 5975-00-981-2486
NSN 5855-01-199-2046
NSN 6320-01-033-6624
NSN 7035-00-991-6877
NSN 5905-01-340-7891
NSN 5960-01-381-2478
NSN 5910-01-333-2143
NSN 5920-00-665-3973
NSN 5910-01-164-8527
NSN 5996-01-227-4496
NSN 5975-00-226-3531