A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6650-01-495-1269
NSN 5996-00-899-0486
NSN 5855-01-149-4110
NSN 5910-00-658-3409
NSN 5960-01-438-0245
NSN 5965-01-313-6569
NSN 4140-01-605-1706
NSN 4140-00-699-0904
NSN 6145-00-107-7913
NSN 6650-01-123-7249
NSN 6130-01-304-0313
NSN 2925-01-206-7948