A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6240-01-415-6004
NSN 5996-01-264-8463
NSN 5920-00-398-0766
NSN 5915-00-556-2189
NSN 7035-01-304-4138
NSN 6130-00-200-9095
NSN 6620-00-803-2346
NSN 5855-01-471-3162
NSN 6240-01-487-3716
NSN 5925-01-627-2898
NSN 6110-01-488-5498
NSN 6145-01-400-5819