Light
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5945-00-290-1779
NSN 6105-01-541-4728
NSN 6650-01-495-0995
NSN 5925-01-121-0401
NSN 6105-00-479-8991
NSN 5996-01-439-3616
NSN 5960-00-929-8002
NSN 5925-01-324-2317
NSN 5960-01-350-2925
NSN 4140-01-361-6137
NSN 5855-01-045-9728
NSN 6610-01-462-5980