Side radius from center of shim is 1.281 in.
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Classification: Other articles of iron or steel not wire nesoi
NSN 5950-00-518-1674
NSN 6685-01-247-4881
NSN 5998-00-116-1014
NSN 6145-01-564-4838
NSN 5965-01-348-8761
NSN 5915-01-399-4579
NSN 5835-01-021-6114
NSN 5996-00-104-5607
NSN 4140-00-236-1089
NSN 5985-01-069-3173
NSN 5895-01-501-0891
NSN 5990-01-215-0590