Side radius from center of shim is 1.281 in.
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Classification: Other articles of iron or steel not wire nesoi
NSN 6130-01-110-9597
NSN 6620-00-273-8735
NSN 6645-01-051-7447
NSN 5835-01-162-3042
NSN 5950-00-203-5809
NSN 5999-00-275-0401
NSN 5990-00-900-4459
NSN 5930-00-250-7799
NSN 5960-01-418-8402
NSN 5985-00-277-7371
NSN 6110-00-705-5863
NSN 5985-01-478-2447