Side radius from center of shim is 1.281 in.
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Classification: Other articles of iron or steel not wire nesoi
NSN 5915-01-224-1938
NSN 5998-01-032-5590
NSN 6105-01-510-8848
NSN 6620-01-606-8964
NSN 5990-01-485-0260
NSN 5835-01-307-8954
NSN 5945-00-216-7432
NSN 6620-00-153-0982
NSN 6620-01-540-1524
NSN 5905-00-657-4617
NSN 5920-01-483-1196
NSN 5945-01-620-4603