Light
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6610-01-011-4972
NSN 6130-01-418-6359
NSN 5950-00-378-9959
NSN 5905-01-089-9632
NSN 6610-01-436-3468
NSN 6685-01-576-4280
NSN 6610-01-033-1748
NSN 6105-01-089-6650
NSN 5985-00-079-0451
NSN 6110-00-271-9928
NSN 6105-01-444-3849
NSN 6110-01-386-3093