A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 2925-01-424-0235
NSN 5935-00-320-8844
NSN 5905-01-439-2373
NSN 5960-01-094-7569
NSN 5895-00-725-2702
NSN 6220-01-463-7490
NSN 5925-01-391-1014
NSN 5920-00-016-8255
NSN 6150-00-814-5905
NSN 6320-00-731-6134
NSN 5835-01-143-9143
NSN 5999-01-053-5499