A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5915-00-789-7476
NSN 6110-01-645-7303
NSN 5975-00-571-4143
NSN 5945-00-127-3838
NSN 5925-00-925-9599
NSN 5910-00-996-2259
NSN 2925-01-510-2221
NSN 5920-01-309-6766
NSN 5925-01-363-9925
NSN 5910-00-892-3187
NSN 7035-01-462-5766
NSN 5945-01-195-3498