A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5905-00-860-0804
NSN 6135-01-142-2417
NSN 6320-00-790-4844
NSN 6150-01-142-1693
NSN 6610-00-949-1289
NSN 5835-00-168-9623
NSN 6650-01-143-4586
NSN 6135-01-463-2445
NSN 6220-00-159-2509
NSN 5895-01-534-2003
NSN 6610-01-118-4011
NSN 7035-01-113-6492