A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5965-01-506-7576
NSN 6105-01-435-4376
NSN 5925-00-535-4120
NSN 5925-01-062-4831
NSN 5965-00-644-0339
NSN 5920-01-493-5567
NSN 6620-01-063-1441
NSN 6220-01-606-2847
NSN 6320-01-616-0843
NSN 5990-01-357-6175
NSN 5895-01-306-9561
NSN 5950-01-634-0677