A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Copper washers including spring washers not threaded
NSN 5935-00-595-9262
NSN 5990-01-400-3299
NSN 5925-01-173-7286
NSN 6320-01-033-6624
NSN 5996-01-094-7025
NSN 6240-01-528-7873
NSN 5990-00-586-6435
NSN 5945-01-120-6729
NSN 6105-01-079-6690
NSN 6685-01-443-0596
NSN 2925-00-284-1534
NSN 6650-01-399-8552