Shaftalso has an external involute spline with 14 teeth; major diameter is 3.000 max; minor diameter is 2.513.
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes shaft(1), straight; and axle(1), straight.
Classification: Transmission shafts and cranks, except camshafts and crankshafts
NSN 5895-01-597-2762
NSN 5920-00-557-9859
NSN 5975-01-471-6861
NSN 6320-01-575-6342
NSN 6240-01-563-1652
NSN 2925-01-185-9144
NSN 6645-01-363-9676
NSN 5990-01-443-2931
NSN 6145-00-719-7395
NSN 6240-00-630-8069
NSN 6110-01-068-9241
NSN 2925-00-449-2478