A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Brazil 
Republic of Korea 
Italy 
Greece 
Turkey Classification: Articles of lead, nesoi
NSN 6320-01-549-7201
NSN 6610-01-534-8075
NSN 6145-01-111-3626
NSN 5855-01-364-1005
NSN 6320-01-600-0787
NSN 6130-01-213-0196
NSN 5835-00-023-0780
NSN 6130-01-481-5846
NSN 5835-01-015-0845
NSN 5915-01-382-5115
NSN 6645-01-437-9017
NSN 5990-00-404-2451