A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Brazil 
Republic of Korea 
Italy 
Greece 
Turkey Classification: Articles of lead, nesoi
NSN 5950-01-423-1742
NSN 5915-01-116-1897
NSN 6320-01-161-6640
NSN 6685-01-424-7521
NSN 7035-01-423-8343
NSN 6650-01-099-3139
NSN 5965-01-030-7253
NSN 5855-01-295-2313
NSN 5930-01-416-3620
NSN 5996-01-281-7336
NSN 6110-01-528-9142
NSN 5990-00-005-5215