A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Brazil 
Republic of Korea 
Italy 
Greece 
Turkey Classification: Articles of lead, nesoi
NSN 5895-01-094-5689
NSN 5960-01-045-3458
NSN 6135-00-120-1034
NSN 5895-00-539-1911
NSN 4140-01-512-8528
NSN 5990-01-115-5859
NSN 6220-01-363-6652
NSN 6105-01-527-9928
NSN 6135-01-186-4010
NSN 5835-01-632-6627
NSN 6220-00-759-6887
NSN 5930-01-099-1801