A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5960-00-721-1744
NSN 5930-01-102-5199
NSN 5990-00-642-9930
NSN 6650-01-481-3618
NSN 5945-01-632-5495
NSN 5910-01-451-4292
NSN 7035-01-592-4732
NSN 6610-00-152-7216
NSN 5985-01-444-4229
NSN 5975-00-419-3256
NSN 2925-00-251-0105
NSN 4140-00-021-7645