A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5999-00-171-3432
NSN 5996-01-024-1981
NSN 5925-00-827-4964
NSN 6135-00-962-4111
NSN 6135-01-568-9107
NSN 6240-00-416-6140
NSN 6150-01-582-8661
NSN 6220-01-081-0593
NSN 5999-01-353-6106
NSN 6145-01-568-2628
NSN 5930-01-422-4262
NSN 5960-01-587-7705