A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6135-01-247-5660
NSN 5895-00-525-3295
NSN 5920-01-177-9200
NSN 5930-01-428-9269
NSN 5998-01-215-0979
NSN 5996-00-903-6308
NSN 2925-01-359-4027
NSN 5910-01-469-2463
NSN 5998-01-398-5376
NSN 6620-00-075-0131
NSN 5855-01-003-7102
NSN 5895-01-265-5147