A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5999-01-510-3427
NSN 5905-00-185-6237
NSN 5998-01-577-2558
NSN 2925-01-306-4228
NSN 5895-01-142-8642
NSN 2925-01-194-9737
NSN 6130-00-034-4735
NSN 6650-01-541-2628
NSN 6650-01-333-9155
NSN 5960-01-391-4701
NSN 5990-01-031-7599
NSN 5835-01-502-9228