A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5920-01-400-3562
NSN 5835-01-631-7390
NSN 5835-01-242-9806
NSN 5910-01-110-7141
NSN 5990-01-150-7443
NSN 5950-01-535-0099
NSN 5855-01-042-7990
NSN 5930-01-634-0659
NSN 5998-01-485-1657
NSN 6650-01-337-0657
NSN 5835-01-572-6900
NSN 5930-00-155-5917