A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 2925-00-445-4054
NSN 5855-01-357-7907
NSN 5985-00-080-2611
NSN 6320-01-181-9474
NSN 5985-00-285-8466
NSN 5965-00-661-0469
NSN 5835-01-584-8538
NSN 5925-00-343-6747
NSN 6650-01-057-6468
NSN 6610-01-095-5037
NSN 5965-00-925-1725
NSN 6650-01-398-1117