A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5915-01-482-0270
NSN 6645-01-475-4723
NSN 5930-00-882-0253
NSN 6685-00-153-0266
NSN 6645-00-363-9775
NSN 5996-00-870-7693
NSN 6110-00-188-9874
NSN 6145-01-511-0024
NSN 5905-00-276-8597
NSN 5895-01-279-1330
NSN 5910-00-782-8241
NSN 5945-01-501-1315