A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5996-01-419-1201
NSN 5999-01-604-9271
NSN 6105-01-569-3191
NSN 6620-01-642-7219
NSN 5910-01-237-3733
NSN 7035-01-355-7284
NSN 2925-01-142-0981
NSN 5905-01-025-8146
NSN 6110-01-148-1831
NSN 6650-00-213-7065
NSN 5930-00-419-7637
NSN 5945-01-258-3951