A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6645-01-064-3711
NSN 6685-01-330-2605
NSN 6145-01-487-1677
NSN 5998-01-560-8689
NSN 6220-01-443-3637
NSN 5950-01-384-3834
NSN 5975-00-141-0554
NSN 6110-00-826-9607
NSN 6150-00-391-1981
NSN 5935-01-435-5824
NSN 5996-00-355-8517
NSN 5920-01-429-1373