Light
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6150-01-104-7888
NSN 5930-01-066-0290
NSN 6650-01-426-4253
NSN 5965-00-185-9687
NSN 6620-01-207-0667
NSN 5930-00-215-2881
NSN 5930-00-038-6148
NSN 5985-01-266-6942
NSN 5998-00-397-6436
NSN 2925-00-513-6644
NSN 6220-01-217-9414
NSN 6645-00-200-2322