Light
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5965-01-106-4969
NSN 7035-01-622-6885
NSN 2925-01-217-5889
NSN 5835-01-332-2867
NSN 6685-01-073-3416
NSN 5965-00-403-7497
NSN 6220-01-422-8179
NSN 6130-01-501-4463
NSN 4140-01-352-2924
NSN 2925-01-604-8984
NSN 5905-00-375-6342
NSN 6220-01-071-2100