Light
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5935-01-541-1004
NSN 5915-01-641-4000
NSN 5975-01-319-2691
NSN 5945-00-518-5248
NSN 5910-01-602-5805
NSN 5999-00-554-9966
NSN 6320-01-450-7513
NSN 5998-01-472-4671
NSN 6150-01-101-3809
NSN 6220-01-352-4141
NSN 5960-01-056-8109
NSN 6610-00-142-9678