Light
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6105-01-068-5972
NSN 5975-00-283-2997
NSN 5950-01-202-5283
NSN 6240-01-651-2850
NSN 6105-01-105-2018
NSN 6220-00-157-5009
NSN 5835-00-401-8655
NSN 6620-01-299-2245
NSN 4140-00-606-9453
NSN 5998-01-177-2229
NSN 5910-01-342-9455
NSN 5925-01-253-0607