A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5920-00-970-8419
NSN 6650-01-486-3964
NSN 5998-01-211-2235
NSN 2925-00-863-8578
NSN 6150-01-514-7370
NSN 6645-01-322-8431
NSN 2925-00-225-5386
NSN 6610-01-174-0708
NSN 6220-01-423-7517
NSN 5985-00-733-7711
NSN 7035-01-183-7550
NSN 6620-01-259-5944