A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 4140-01-456-9471
NSN 5935-00-972-8555
NSN 5920-01-358-6930
NSN 6130-01-634-0603
NSN 6650-01-328-8363
NSN 5920-00-064-2375
NSN 4140-00-618-0530
NSN 5950-01-268-1573
NSN 5905-00-477-9060
NSN 5930-01-656-4231
NSN 5998-00-843-1125
NSN 5975-01-203-4581