A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5965-01-562-4667
NSN 5996-01-354-9386
NSN 5930-01-435-2260
NSN 2925-01-208-0711
NSN 5910-01-110-7141
NSN 6650-01-332-7634
NSN 6110-01-387-0226
NSN 5985-00-998-5589
NSN 6105-01-417-2969
NSN 5905-01-487-6534
NSN 6645-01-343-6077
NSN 5920-01-370-4376