A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5990-01-248-8222
NSN 5910-01-067-9859
NSN 5960-01-003-0815
NSN 5950-01-268-7336
NSN 5855-01-352-7033
NSN 6145-01-018-6539
NSN 5920-01-500-2150
NSN 5925-01-392-9915
NSN 6130-00-792-4612
NSN 5925-01-178-5210
NSN 5945-01-173-2550
NSN 5925-01-411-1034