A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Copper washers including spring washers not threaded
NSN 6110-01-601-6064
NSN 5920-01-605-1604
NSN 5965-00-973-9974
NSN 6220-01-610-5783
NSN 5925-01-629-1410
NSN 6645-01-023-2180
NSN 5895-01-381-1313
NSN 6645-00-764-3355
NSN 2925-01-468-7073
NSN 5910-01-378-9785
NSN 7035-01-652-5482
NSN 5925-01-422-4569