Second end has a hole 0.281 in. Diameter and a groove 0.735 in. Dia, 0.125 in. Wide
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes shaft(1), straight; and axle(1), straight.
Classification: Transmission shafts and cranks, except camshafts and crankshafts
NSN 6145-00-542-7980
NSN 5965-01-199-8362
NSN 5998-01-517-5534
NSN 5895-00-410-3772
NSN 6105-01-413-5255
NSN 5895-01-437-2590
NSN 6320-01-029-4220
NSN 6240-01-580-0419
NSN 5905-01-580-2078
NSN 5985-01-259-2057
NSN 5999-00-705-1371
NSN 2925-01-437-1128