Second end has a hole 0.281 in. Diameter and a groove 0.735 in. Dia, 0.125 in. Wide
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes shaft(1), straight; and axle(1), straight.
Classification: Transmission shafts and cranks, except camshafts and crankshafts
NSN 5960-01-226-0342
NSN 5960-00-287-9932
NSN 6105-00-339-8366
NSN 2925-00-915-1827
NSN 6685-00-159-0628
NSN 5999-01-169-6052
NSN 5925-01-113-7793
NSN 7035-01-316-7860
NSN 5999-00-266-3805
NSN 5905-01-061-2420
NSN 5990-01-093-3087
NSN 6135-01-090-5365