Second end has a hole 0.281 in. Diameter and a groove 0.735 in. Dia, 0.125 in. Wide
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes shaft(1), straight; and axle(1), straight.
Classification: Transmission shafts and cranks, except camshafts and crankshafts
NSN 6135-00-702-2772
NSN 6130-00-995-8449
NSN 6685-01-152-2846
NSN 5985-01-271-9659
NSN 6110-01-446-7126
NSN 6610-01-589-2552
NSN 5895-00-637-2658
NSN 5895-01-512-2938
NSN 6610-00-879-2788
NSN 5945-00-058-6710
NSN 6610-00-889-8844
NSN 5996-01-010-8137