Second end has a hole 0.281 in. Diameter and a groove 0.735 in. Dia, 0.125 in. Wide
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes shaft(1), straight; and axle(1), straight.
Classification: Transmission shafts and cranks, except camshafts and crankshafts
NSN 5835-00-244-4956
NSN 6610-00-410-8968
NSN 6130-01-191-5087
NSN 5930-00-111-1369
NSN 5925-01-413-6811
NSN 5960-01-509-8779
NSN 6320-01-434-6861
NSN 5920-00-215-5642
NSN 7035-01-246-9936
NSN 6150-00-576-3964
NSN 5905-01-275-6788
NSN 5920-01-183-7938