Side radius from center of shim is 1.281 in.
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Classification: Other articles of iron or steel not wire nesoi
NSN 5985-01-570-7780
NSN 6645-01-023-8724
NSN 5835-01-555-8963
NSN 5905-01-313-0418
NSN 6240-00-963-5964
NSN 5998-01-442-6886
NSN 5965-01-432-9734
NSN 6220-01-167-7859
NSN 5999-00-757-1781
NSN 6645-01-367-7201
NSN 5910-01-418-1789
NSN 6320-00-701-0437