A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5925-01-433-9512
NSN 5990-01-004-6343
NSN 7035-01-498-0582
NSN 5960-01-224-3850
NSN 5925-00-930-5559
NSN 5960-00-134-0607
NSN 5925-01-060-5265
NSN 5990-01-414-7618
NSN 5950-00-066-4660
NSN 6135-00-840-6451
NSN 5935-00-776-2916
NSN 6240-01-159-5043