A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5996-01-030-1387
NSN 6135-00-062-5080
NSN 6320-00-369-1333
NSN 6645-01-360-4562
NSN 5975-01-227-4441
NSN 2925-01-437-9041
NSN 7035-01-599-1694
NSN 6105-01-386-1529
NSN 5945-00-664-6668
NSN 5835-01-091-8353
NSN 6650-00-641-6139
NSN 5895-01-634-0630