A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5920-01-017-0687
NSN 5910-00-799-3614
NSN 6150-00-870-7127
NSN 6610-01-400-3880
NSN 5930-00-649-8315
NSN 5910-00-783-5748
NSN 6320-01-370-4218
NSN 5985-00-492-7928
NSN 5985-00-277-7371
NSN 5998-01-661-3903
NSN 5915-01-519-6675
NSN 6620-01-263-6697