A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 2925-01-463-8856
NSN 7035-01-235-6023
NSN 6650-01-124-1902
NSN 5945-01-313-2052
NSN 5835-01-251-4945
NSN 6610-01-328-7824
NSN 6135-01-551-0562
NSN 5998-00-314-5724
NSN 5920-01-120-9817
NSN 5925-01-409-2616
NSN 6620-00-266-2763
NSN 5905-01-324-5991