A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 7035-01-022-1008
NSN 7035-00-371-7749
NSN 5985-01-493-9298
NSN 5895-00-007-1295
NSN 5985-01-431-8882
NSN 5935-01-204-8333
NSN 5895-01-274-9294
NSN 5905-01-492-6248
NSN 6620-01-619-2978
NSN 6130-00-947-0870
NSN 5950-00-454-9946
NSN 5945-01-165-1771