A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6240-00-925-4662
NSN 6620-00-820-9616
NSN 6135-01-139-1700
NSN 6645-00-837-2267
NSN 6135-00-223-9563
NSN 5895-01-430-7181
NSN 5915-01-290-4107
NSN 5945-01-379-3698
NSN 2925-00-800-4685
NSN 5965-01-233-2759
NSN 5835-01-434-0790
NSN 5835-01-561-2959